| ClassicXray Home |
| View Boxes |
| X-ray Processors |
| Imaging film |
| X-ray Cassettes/Screens |
| MISC. X-ray Supplies |
| Contact Us |
OptiMax X-ray Processor
The OPTIMAX® is an innovative table-top processor for film types up to a width of 14” (35 cm). The allrounder is used in various fields: Orthopedic, Chiropractic, other general radiography including mammography, in veterinary medicine as well as for laboratory and graphic arts applications. The OPTIMAX® is easy to service and presents itself with an attractive design. Uncompromising quality The one-piece casing and the exclusive use of high quality components guarantee the highest degree of reliability. It goes without saying that we supply the OPTIMAX® with everything that is needed for operation like light protection cover, replenishment containers and connecting hoses. Best economic efficiency The integrated stand-by mode reduces your water and energy consumption. The film detection with a micro sensor enables intelligent and economic replenishment depending on the processed film surface. Because of that the OPTIMAX® saves chemicals and provides a constant high quality of your image. No problem operation, perfect safety With the simple control panel the tanks can easily be filled during the warm-up cycle, and the developer temperature can be set. Acoustic and visual controls signal the readiness for processing of the next film. The anti-crystallization and anti-oxidation programs in combination with the continuous circulation of the chemicals and the thermostat for the developer ensure constant high image quality. The processed film is available after 90 seconds. For special applications the processing time can be adjusted to 135 or 167 seconds (factory set. Please state preferred timing when placing order). Made in Germany |
Technical Data OPTIMAX®: • Film format: min. 4“ x 4“ (10 x 10 cm) max. 14“ x ∞ (35 x ∞ cm) • Film type: sheet and rollfilms • Process time: 90 / 135 / 167 sec (factory set) • Capacity at 90 sec process time: Film format (L x W): 4” x 4” (10 x 10 cm) (3 x parallel) 840 films/hr. Film format (L x W): 9 1/2” x 7” (24 x 18 cm) (2 x parallel) 258 films/hr. Film format (L x W): 9 1/2” x 12” (24 x 30 cm) 129 films/hr. Film format (L x W): 17” x 14” (43 x 35 cm) 75 films/hr. • Developer temperature: 82 – 99°F (28 – 37°C) • Dryer temperature: 149°F (65°C) • Film detection: micro sensor • Replenishment rate: 0.158 gal per 10 square feet (600 ml/m²) • Replenishment containers: 6.6 gal (25 l) • Anti-oxidation: in 60 min intervals • Anti-crystallization: in 20 min intervals • Tank volumes D/F/W: 1.3 / 1.3 / 1.3 gal (5 / 5 / 5 Liter) • Water consumption: 1/2 gal/min (1.9 l/min) during processing; 0.0 gal/min (0.0 l/min) during stand-by • Energy consumption: 1.4 kWh during processing, 0.12 kWh during stand-by • Dimensions (L/W/H): 30“ x 23“ x 161/2“ (77 x 59 x 42 cm) • Weight (empty/filled): 77/110 lb (35/50 kg) • Electrical connections: 110 – 120 V; 15 A (20 A plug); 50/60 Hz 220 – 240 V; 8.8 A; 50/60 Hz • Water connection: 3/4“; 29 – 145 psi (3/4“; 2 – 10 bar) |
Copyright 2000-2008